Click-lock SPC is designed for DIYers. With basic tools and a free weekend, most homeowners can install a room themselves. Here’s how.

Tools You’ll Need

  • Utility knife and straight edge
  • Tapping block and pull bar
  • Rubber mallet
  • Spacers (1/4″)
  • Measuring tape and pencil

Step 1: Acclimate the Boxes

Let the boxes sit flat in the room for 48 hours before installing. SPC is more stable than laminate, but it still benefits from acclimation.

Step 2: Prep the Subfloor

The subfloor should be clean, dry, and flat to within 3/16″ over 10 feet. Fix any high or low spots before you start.

Step 3: Plan Your Layout

Run planks parallel to the longest wall or the strongest light source. Stagger seams by at least 8″ for a natural look.

Step 4: Install Row by Row

Start in a corner with the tongue side facing the wall. Use spacers to leave a 1/4″ expansion gap. Click each plank in at an angle, then press down. Tap snug with the tapping block.

Step 5: Finishing Touches

Remove spacers. Install transition strips at doorways and baseboards or quarter round to cover the expansion gap.

Need to figure out how much you need? Use our flooring calculator.